Denali Cansmart for the Triumph Tiger 900 and 1200

Denali Cansmart for the Triumph Tiger 900 and 1200

Harness the flexibility and intelligence of your Triumph motorcycle's CANbus electrical system to significantly simplify accessory installation with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller provides plug-and-play installation and integrated control of up to four accessories, allowing dozens of customizable settings that can be controlled directly from your Triumph's hand controls or the CANsmart™ Accessory Manager Software.

CANsmart's four circuits are pre-programmed to independently connect and control two sets of DENALI 2.0 lights, a SoundBomb horn and our B6-auxiliary brake lights.

Gen II - More features, more power, more versatility Unlike the Gen I CANsmart, each of the Gen II's four circuits can deliver a full 10 amps of continuous current, and each circuit can be configured to operate any type of accessory. The maximum power consumption for the entire unit remains continuous at 30 amps. The Gen II also has two new auxiliary light settings. You can now modulate your auxiliary lights for increased visibility and cancel your left and right side lights independently when you activate the corresponding turn signal.

Features

• High/Low Sync: Set auxiliary lighting to switch between programmable high/low settings with the original high beam switch.
• On/Off and Dim: Independent control of two sets of lights On/Off and change intensity (both day and night) directly from the original vehicle switches.
• Modulate Light: Set auxiliary lights to modulate for increased visibility to other road users.
• Flash to Pass: Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will flash rapidly three times.
• Cancel with Turn Signal: This feature cancels the corresponding auxiliary light when you turn on your turn signal to prevent powerful auxiliary lights from overpowering your turn signal.
• Inverse Flashing With Hazards: This feature makes your auxiliary lights flash in the opposite direction to your hazard lights, increasing visibility in the event of a roadside breakdown.
• Plug & Play Horn System: Quickly and easily connect powerful after-market horns, such as our SoundBomb™, without the need to add additional wiring harness or relays.
• Strobe with Horn: With this feature, the CANsmart™ software will automatically flash your auxiliary lights when you use your horn. This feature works whether you have the factory horn or the SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology: The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration, even before you touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake feature is activated.
• Flash Pattern Braking: The CANsmart™ offers four different flashing patterns that make our super-bright auxiliary brake lights noticeable even to motorists behind you. You can set the auxiliary brake lights to flash only when braking hard, to flash continuously when applying the brake, or to flash four times quickly and then remain steady (California legal flash rate).
• Circuit Function Selector: The Circuit Function Selector in the CANsmart software allows you to run any accessory on any of the four circuits. Click on a circuit icon to open the drop-down menu and make your selection from the list of available circuit functions.
• Switched Power Source: The CANsmart™ provides a universal "accessory" option that easily gives you clean switched 12V power. That means any accessory you connect to this circuit will turn on and off with your ignition.
• Time Out Delay: You can also set the accessories on this circuit to have a delayed timeout. This keeps them on for up to 30 seconds after you turn off your engine.
• On Board Power: The "accessory" circuit option is ideal for powering your GPS, phone, heated clothing or any other electronic device.

In the Box

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Horn Extension Cable
• B6 Brake Light Wiring Adapter
• CAN bus Connection Splitter Cable
• Tie-wraps
• Self-adhesive velcro closure
• Micro USB Programming Cable

Manual:

Mounting Denali Cansmart for the Triumph Tiger 900 and 1200