Denali Cansmart gen 2 for the Husqvarna Norden 901

Leverage the flexibility and intelligence of your Husqvarna Norden 901's CAN-bus electrical system to significantly simplify accessory installation with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller offers plug-and-play installation and integrated control of up to four accessories, allowing dozens of customizable settings that can be controlled directly from your Norden's switch cluster or the CANsmart™ Accessory Manager Software.

Gen II - More features, more power, more versatility

Unlike the Gen I CANsmart, all four circuits of the Gen II can deliver a full 10 amps of continuous current, and each circuit can be configured to output any type of accessory. The maximum power consumption for the entire unit remains 30 amps continuous. The Gen II also has a new auxiliary lighting setting where you modulate your auxiliary lighting for added visibility.

Features

• High/Low Sync - Set passing lights and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
• ON/OFF and Dim - Independently control two sets of lights ON/OFF and change intensity levels from your original vehicle switches.
• Modulate Lights - Set auxiliary lights to modulate for increased visibility to other road users.
• Flash to Pass - Need to get someone's attention? Pulse your high beam switch three times and your auxiliary lights will flash three times rapidly.
• Plug & Play Horn Installation - Quickly and easily connect powerful aftermarket horns like our SoundBomb™ without adding an additional wiring harness or relay.
• Strobe with Claxon - With this feature selected, the CANsmart™ software will automatically flash your passing lights or auxiliary lights when you use your horn. This feature works whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration before you even touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake feature is activated.
• Flashing Pattern when Braking - The CANsmart™ offers four different flashing patterns, making our super-bright auxiliary brake lights even more noticeable to motorists behind you. You can set the auxiliary brake lights to blink only when braking hard, blink continuously while your brake is depressed, or blink four times quickly and then hold (California legal flash rate).
• Circuit Function Selector - The Circuit Function Selector in the CANsmart software lets you run any accessory on one of four circuits. Click on a circuit icon to open the drop-down menu and make your selection from the list of available circuit functions.
• Switched Power Source - The CANsmart™ provides a universal "accessory" option that easily gives you clean switched 12V power. That means that whatever accessory you connect to this circuit will turn on and off with your ignition.
• Delayed Shutdown - You can also set the accessories on this circuit to have a delayed shutdown. This will keep them powered for up to 30 seconds after you turn off your engine.
• On Board Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated clothing or any other electronic device.

What's in the box.

• CANsmart™ Controller
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb horn extension cable
• B6 Brake Light Wiring Adapter
• Horn Trigger Wire Harness
• High beam Trigger Wire harness
• Tie-wraps
• Self-adhesive Velcro attachment
• Micro USB programming cable

Vehicle fit

• Norden 901 (2022 - 2023)
• Norden 901 Explorer (2023)