Denali Cansmart gen 2 for the Yamaha Tenere 700

Leverage the flexibility and intelligence of your Yamaha Tenere's CAN-bus electrical system to significantly simplify accessory installation with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller offers plug-and-play installation and integrated control of up to four accessories, allowing dozens of customizable settings that can be controlled directly from your Ténéré's hand controls or the CANsmart™ Accessory Manager Software.

CANsmart's four circuits are pre-programmed to independently connect and control two sets of DENALI 2.0 lights, a SoundBomb horn and our B6-auxiliary brake lights.

Features:

1. High/Low Sync: Set auxiliary lighting to switch between programmable high/low settings with the factory high beam switch.
2. ON/OFF and Dim: Turn your primary light set ON/OFF and change intensity levels directly from your original vehicle switches.
3. Modulate Light: Set auxiliary lights to modulate to increase your visibility to other road users.
4. Flash to Pass: Need to attract attention? Pulse your high beam switch three times and your auxiliary lights will flash three times rapidly.
5. Plug & Play Horn System: Quickly and easily connect powerful aftermarket horns, like our SoundBomb™, without adding an extra harness or relay.
6. Strobe with Claxon: With this feature selected, the CANsmart™ software will automatically flash your auxiliary lights when you use your horn, regardless of whether you have the factory horn or SoundBomb™ horn installed.
7. Deceleration Activated: "Smart Brake" Technology: The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration, even before you touch the brake. Adjust the sensitivity and set the minimum speed at which the Smart Brake feature is activated.
8. Flash Pattern Braking: The CANsmart™ offers four different flash patterns that make our very bright auxiliary brake lights even more noticeable to motorists behind you.
9. Circuit Function Selector: The Circuit Function Selector in the CANsmart software lets you run any accessory on one of four circuits.
10. Switchable Power Source: The CANsmart™ provides a universal "accessory" option that gives you easily switchable 12V power.
11. Time Out Delay: You can also set accessories on this circuit to have a delayed timeout, powering them up to 30 seconds after your engine is turned off.
12. On Board Power: The "accessory" circuit option is ideal for powering your GPS, phone, heated clothing or any other electronic device.

What's in the box.

• CANsmart™ Controller
• 4-Way High Beam Harness (for models with color TFT display)
• 6-Way High Beam Harness (for models with LCD display)
• Euro5 Pass-Through Harness (2022+ Euro5 models)
• Euro4 Pass-Through Harness (2019 - 2022 Euro4 models)
• (x2) 5.5ft Light Extension Cables
• 5ft SoundBomb Claxon Extension Cable
• B6 Brake Light Wiring Adapter
• Tie-wraps
• Adhesive Velcro Fastener
• Micro USB Programming Cable

Manual:

Mounting Denali Cansmart gen 2 for the Yamaha Tenere 700