Denali Cansmart Gen 2 KTM 1290, 1190, 1090, 1050 and 790

Leverage the flexibility and intelligence of your KTM motorcycle's CAN-bus electrical system to significantly simplify accessory installation with the new and improved DENALI CANsmart™ Controller GEN II.

The DENALI CANsmart™ Controller offers plug-and-play installation and integrated control of up to four accessories, allowing dozens of customizable settings that can be controlled directly from your KTM's existing handlebar controls, the optional KTM CANsmart Control Switch or the CANsmart™ Accessory Manager Software.

The CANsmart's four circuits are pre-programmed to independently connect and control two sets of DENALI lights, a SoundBomb horn and our B6-auxiliary brake lights. Optimize the functionality of your KTM with the DENALI CANsmart™ Controller GEN II.

Features:

• KTM Dongle Functionality:
  Activates additional functions in the ABS control unit and ECU and remembers settings, eliminating the need to reset the ABS and MTC each time the engine is restarted. Also activates the "Bad Fuel" function for 80 octane, which reduces engine power at lower fuel quality.
• High/Low Sync:
  Set auxiliary lights to switch between programmable high/low settings with the factory high beam switch.
• ON/OFF and Dim:
  Independent control of two sets of lights ON/OFF directly from your original vehicle switches. Brightness can be adjusted with software or optional control switch.
• Modulate Light:
  Set auxiliary lights to modulate to increase your visibility to other road users.
• Flash to Pass:
  Need to attract attention? Pulse your high beam switch three times and your auxiliary lights will flash three times rapidly.
• Cancel With Turn Signal:
  This feature cancels the corresponding auxiliary light when you turn on your turn signal to prevent powerful auxiliary lights from overpowering your turn signal.
• Inverse Flashing With Hazards:
  This feature makes your auxiliary lights flash inversely to your hazard lights, increasing visibility during roadside emergencies.
• Plug & Play Horn System:
  Quickly and easily connect powerful aftermarket horns like our SoundBomb™ without adding an additional harness or relay.
• Strobe with Claxon:
  With this feature selected, the CANsmart™ software will automatically flash your auxiliary lights when you use your horn, regardless of whether you have the factory horn or SoundBomb™ horn installed.
• Deceleration Activated "Smart Brake" Technology:
  CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration, even before you touch the brake. Adjust the sensitivity and set the minimum speed at which the Smart Brake feature is activated.
• Flash Pattern Braking:
  The CANsmart™ offers four different flash patterns that make our very bright auxiliary brake lights even more noticeable to motorists behind you.
• Circuit Function Selector:
  The Circuit Function Selector in the CANsmart software lets you run any accessory on one of four circuits.
• Switchable Power Source:
  The CANsmart™ provides a universal "accessory" option that gives you easily switchable 12V power.
• Time Out Delay:
  You can also set accessories on this circuit to have a delayed timeout, powering them up to 30 seconds after your engine is turned off.
• On Board Power:
  The "accessory" circuit option is ideal for powering your GPS, phone, heated clothing or any other electronic device.

What's in the box.

1. CANsmart™ Controller
2. (x2) 5.5ft Light Extension Cables
3. 5ft SoundBomb Claxon Extension Cable
4. B6 Brake Light Wiring Adapter
5. Tie-wraps
6. Adhesive Velcro Fastener
7. Micro USB Programming Cable

Manual:

Mounting Denali Cansmart Gen 2 KTM 1290, 1190, 1090, 1050 and 790