Denali Dialdim controller for the KTM 1290 Adventure 21-

1. (1x) DNL.WHS.20500 - DialDim Lighting Controller.
2. (1x) DNL.WHS.22800 - DialDim wiring diagram for KTM 1290 Adventure

A New Standard in LED Light Dimming & Control

Our groundbreaking DialDim™ Lighting Controller features a multicolor halo dimmer switch that allows you to independently turn two sets of 3-wire auxiliary lights on and off and dim them from a single consolidated wiring. The LED halo switch shows you exact settings and allows effortless dimming while driving. The blue halo controls light set one and the green halo controls light set two; simply double-click to switch between the two circuits.

The controller also has inputs for high beam, turn signals and horn to activate intelligent flash functions that allow you to cancel your auxiliary lights with your turn signal, flash your auxiliary lights as turn signals, or flash your lights when you press your horn.

More Functions, More Feedback!

Our patent-pending multicolor halo dimmer switch can do much more than just turn your lights on and off and dim them. For starters, it shows the exact intensity of both of your lights, so you never have to guess whether your lights are on, or what intensity they are at.

Thanks to electronically fused circuits, the halo switch can also display the fuse values for each circuit and allow you to select them. And if a fuse blows, the LED halo will flash red and provide real-time feedback and enable fuse resetting.

Last but not least, the switch halo acts as a battery monitor with a low voltage automatic shutdown function. Our industry-first design will flash different colors at startup to indicate the health of your battery and automatically turns off your auxiliary light if the battery voltage drops below 10.8 volts.

The controller housing and switch both feature a fully waterproof design with gaskets and o-rings on every joint to ensure trouble-free operation in outdoor environments.

Features:

• ON/OFF & Dim:  Independent control of two sets of lights ON/OFF and intensity level with the single DialDim™ switch. The blue halo controls light set one and the green halo controls light set two. Double-click to switch between the two circuits.
• High/Low Sync: Your auxiliary lighting automatically switches between your selected dimming setting and full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
• Stealth Mode: A smart 0% dimming setting on the switch causes your lights to be "off" during normal driving conditions, but jump to 100% intensity with your vehicle's high beam switch. The lights also respond to turn signal and horn inputs in this mode, but remain off when no input is detected.
• Cancel with Turn Signal: When enabled, the main lights (blue circuit 1) are cancelled synchronized with your turn signal to prevent "washing out" of your factory turn signal. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
• Flashing as a Turn Signal: When enabled, your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
• Strobe with Claxon: When enabled, your auxiliary lights on both circuits will flash at 4 Hz when you press your horn. Simply connect the green input wire to your vehicle's horn circuit to enable this feature.
• Electronically Fused: Both light circuits are electronically fused and can be set directly from the switch! The halo will light up red to alert you when a fuse in the circuit has blown.
• Voltage display indicator: When starting the vehicle, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage below 11.8V.
• Low Voltage Cutoff: If the battery voltage drops below 10.8 V, the lights will not turn on to prevent you from getting stranded. The switch halo flashes 4 red LEDs to indicate the low voltage condition.

Manual:

Mounting Denali Dialdim controller for the KTM 1290 Adventure 21-

KTM 1290 wiring harness