Denali DialDim controller with canbus for the BMW R 1250 GS GSA

This Denali DialDim Lighting Controller has the same great features and settings as the universal controller, but includes a plug-and-play wiring adapter for effortless installation on the BMW R1250 GS and Adventure. Easily connects to your battery and to a plug under your seat to unlock unique flash functions and full independent dimming control of two sets of DENALI driving lights.

A New Standard in LED Light Dimming & Control
Our groundbreaking DialDim™ Lighting Controller features a multicolor halo dimmer switch that allows you to independently turn on, off and dim two sets of 3-wire auxiliary lights using a single consolidated wiring. The LED halo switch displays your exact settings and allows effortless dimming while driving. The blue halo controls light set one and the green halo controls light set two; simply double-click to switch between the two circuits.

The controller also has high beam, turn signal and horn data to unlock intelligent flash functions that allow your auxiliary lights to cancel with your turn signal, flash your auxiliary lights as turn signals, or flash your lights when you use your horn.

More Features, More Feedback!
The multicolor halo dimmer switch can do much more than just turn your lamps on and off and dim them. First, it displays the exact intensity of both of your lights, so you never have to guess whether your lights are on, or what intensity they are at.

Thanks to electronically integrated circuitry, the halo switch can also display and select the fuse values for each circuit. And if a fuse blows, the LED halo will turn red to provide real-time feedback and to reset the fuse.

Last but not least, the switch halo acts as a battery monitor with an automatic shutdown function for low voltage. Our industry-first design will flash different colors at startup to indicate the health of your battery and automatically turn off your auxiliary lights if the battery voltage drops below 10.8 volts.

The controller housing and switch are designed to be fully waterproof with seals and O-rings at every connection point for trouble-free operation in outdoor environments.

Features:

• ON/OFF & Dimming - Independently control two sets of lights ON/OFF and intensity using the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double-click to switch between the two circuits.
• High/Low Synchronization - Your auxiliary lights automatically switch between your selected dim setting to full intensity with the factory high beam switch. Simply connect the blue input wire to your vehicle's high beam circuit to activate this feature.
• Stealth Mode - A smart 0% dimin setting on the switch will cause your lights to be "off" during normal driving conditions, but jump to 100% intensity when using your vehicle's high beam switch. The lights will also respond to turn signal and horn inputs in this mode, but remain off when no input is detected.
• Cancel with Turn Signal - When enabled, the main lights (blue circuit 1) will synchronize with your turn signal to prevent your factory turn signal from "washing out." Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to activate this feature.
• Flashing as a Turn Signal - When enabled, your amber visibility lights (green circuit 2) will flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to activate this feature.
• Flashing with Horn - When enabled, your auxiliary lights on both circuits will flash at a rate of 4 Hz when you use your horn. Simply connect the green input wire to your vehicle's horn circuit to activate this feature.
• Electronically Integrated Circuits - Both light circuits are electronically integrated and can be set directly from the switch! The halo will illuminate red to alert you when a fuse has blown.
• Voltage Display Indicator - When starting the vehicle, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate a battery voltage below 11.8 volts.
• Low Voltage Shutdown - If the battery voltage drops below 10.8 volts, the lights will not turn on to prevent being stranded. The switch halo will flash 4 red LEDs to indicate low voltage.

Specifications:

• Two fully independent light circuits
• Eight intensity levels per circuit (5%, 15%, 30%, 45%, 60%, 75%, 100%)
• Eight electronic fuse ratings (1A, 2A, 4A, 6A, 8A, 10A, 15A, 20A)
• One input harness (ignition, high beam, horn, left turn signal, right turn signal)
• Maximum 20A per circuit (maximum 30A combined)
• Voltage: 12 VDC

Mounting Denali DialDim controller with canbus for the BMW R 1250 GS GSA