Denali Dialdim for the Yamaha Tenere 700

• (1x) DNL.WHS.20500 - DialDim Lighting Controller.
• (1x) DNL.WHS.20300 - DialDim wiring diagram for the Yamaha Tenere 700

A New Standard in LED light dimming and control
Our groundbreaking DialDim™ Lighting Controller features a multicolor halo dimmer switch that lets you independently turn two sets of 3-wire auxiliary lights on and off and dim them from a single merged wiring scheme. The LED halo switch displays your exact settings and allows effortless dimming while on the go. The blue halo controls light set one and the green halo controls light set two; simply double-click to switch between the two circuits.

The controller also has inputs for high beam, turn signal and horn to unlock intelligent flashing functions that can cancel your auxiliary lights with your turn signal, flash your auxiliary lights as turn signals, or flash your lights when you use your horn.

Features:

• On/Off & Dim - Independently control two sets of lights on/off and intensity with the single DialDim™ Switch. The blue halo controls light set one and the green halo controls light set two. Double-click to switch between the two circuits.
• High/Low Synchronization - Your auxiliary lighting automatically switches between your selected dimming mode and full intensity with the factory main light switch. Simply connect the blue input wire to your vehicle's high beam circuit to enable this feature.
• Stealth Mode - A smart 0% dimming setting on the switch ensures your lights are "off" during normal driving conditions, but they jump to 100% intensity when using your vehicle's high beam switch. The lights also respond to turn signal and horn inputs in this mode, but remain off when no input is detected.
• Cancel with Turn Signal - When enabled, the main light (blue circuit 1) will synchronize with your turn signal to prevent "washout" of your factory turn signal. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
• Flashing as a Turn Signal - When enabled, your amber visibility lights (green circuit 2) flash in sync with your factory turn signals. Simply connect the yellow and orange input wires to your vehicle's turn signal circuit to enable this feature.
• Strobe with Horn - When enabled, your auxiliary lights on both circuits will flash at 4 Hz when your horn is used. Simply connect the green input wire to your vehicle's horn circuit to enable this feature.
• Electronically Fused - Both light circuits are electronically fused and can be set directly from the switch! The halo will glow red to alert you when a circuit fuse has blown.
• Voltage Display Indicator - When starting the vehicle, the switch halo will flash green to indicate a healthy battery voltage, or flash red to indicate that the battery voltage is below 11.8V.
• Low Voltage Shutdown - If the battery voltage drops below 10.8 V, the lights will not turn on to prevent you from getting stranded. The halo of the switch will flash 4 red LEDs to indicate the low voltage.

Manuals:

Denali Dialdim for the Yamaha Tenere 700

Mounting Denali Dialdim for the Yamaha Tenere 700