Denali CANsmart GEN II Harley Davidson Pan America RA1250

Denali Electronics' revolutionary Harley-Davidson CanSmart controller provides plug-and-play connectivity and intelligent control of aftermarket and original Harley-Davidson accessories directly from your motorcycle's original switches.

Simply connect the CANsmart™ Controller to your Harley-Davidson's diagnostic port to access over 35 programmable accessory settings that provide intelligent control over auxiliary lights, horns, brake lights or any other accessory you can think of. The four accessory circuits are electronically fused and can deliver up to 25 peak amps (10 amps continuous).

Features:

1. High/Low Sync - Set transient lights and auxiliary lights to switch between a programmable high/low setting with the original high beam switch.
2. On/Off and Dimming - Independently control two sets of lights on/off and adjust intensity (both day and night) directly from your bike's original switch. Press three times to turn the lights on/off, or hold for 3 seconds to enter dimming mode where you can switch between 10% - 100% intensity.
3. Modulating Lights - Set passing lights or auxiliary lights to modulate to increase your visibility to other road users.
4. Flashing Light Activation - Need to get someone's attention? Press your high beam switch three times and your auxiliary lights will blink three times rapidly.
5. Cancel with Turn Signal - This feature cancels the corresponding auxiliary light when you turn on your turn signal to prevent powerful auxiliary lights from overpowering your turn signal.
6. Blink with Turn Signal - This feature will blink the corresponding auxiliary lights when you turn on your turn signal, so that auxiliary lights can act as turn signals.
7. Plug & Play Horn System - Quickly and easily connect powerful aftermarket horns, such as our SoundBomb™, without the need to add an additional harness or relay.
8. Flash with Horn - With this feature selected, the CANsmart™ software will automatically flash your passing lights or auxiliary lights when you use your horn. This feature works with both the factory horn and the SoundBomb™ horn installed.
9. Deceleration Activated "Smart Brake" Technology - The CANsmart™ reads vehicle speed in real time to activate your auxiliary brake light during deceleration, even before you touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake feature is activated.
10. Flash Pattern when Braking - The CANsmart™ offers four different flash patterns that make our super-bright auxiliary brake lights even more noticeable to road users behind you. You can set the auxiliary brake lights to flash only when braking hard, flash continuously while your brake is depressed, or flash four times rapidly and then hold steady (California legal flash rate).
11. Switched Power Source - The CANsmart™ provides a universal "accessory" option that easily gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
12. Delayed Shutdown - You can also set the accessories on this circuit to have a delayed shutdown. This keeps them powered for up to 30 seconds after you turn off your engine.
13. Built-in Power - The "accessory" circuit option is ideal for powering your GPS, phone, heated clothing or any other electronic device.
    

What's in the box.

• CANsmart™ Controller
• (x2) 5.5 ft Extension cables for lighting
• 5 ft Extension Cable for SoundBomb Horn
• B6 Brake Light Wiring Adapter
• Binding Strips
• Self-adhesive hook-and-loop fastener
• Micro USB Programming Cable
  
  

Get full control of your Harley-Davidson accessories with the CANsmart™ Controller GEN II. Order today and discover a new dimension of intelligence and convenience for your motorcycle ride.

Assembly instructions Denali Pan America RA 1250 CANsmart™ Controller GEN II