Duonix Bike-Scan 3.7 inch 2 Pro ODB-2 readout computer and cable

This Bike-Scan Pro is the readout computer for any BMW with an ODB-2 connection. The computer has a small 3.5 in. TFT system, is equipped with an ODB-2 plug and supports the Can-Bus protocol.

The Bike Scan readout computer and is very complete. The computer can read the engine in almost any control unit. The Bike Scan can be easily updated via any windows computer so that it always remains up-to-date.

Supported control units:
Engine electronics / engine control unit CDI

1. Central electronics / chassis electronics BCM
2. Instrument cluster / speedometer
3. Tyre pressure monitoring RDKS
4. ABS - anti-lock braking system
5. Anti-theft alarm system / Alarm system
6. Radio / Multimedia
7. Radio control unit
8. Electric Hydraulic Tilt Stand
9. Battery Management System BMS
10. Integrated Supply Control Module ICSM
11. Electric Power Steering EPS
12. Electronic power throttle EPT
13. Exhaust flap control FCE
14. Keyless GO System
15. Headlights LED
16. Automatic gearbox / transmission control
17. Traction control
18. Airbag

Diagnostic functions / diagnostic options:

1. Service reset / Service reset / DESMO / Oil
2. Read and delete fault memory completely
3. Key programming
4. Set injection system
5. Unlocking the immobilizer
6. Throttle valve setting / adaptation
7. Date and time setting e.g. after battery replacement
8. Reset adaptation values
9. Specific actual/target values / live data
10. Read current KM and software
11. Read out chassis number
12. Valve clearance service reset
13. Bleed ABS pressure modulator / Bleed test from ABS hydraulic system
14. Brake wear indicator Initialise
15. Windshield calibration
16. ESA/SAF shock absorber calibration
17. Stepper calibration
18. Calibration of height sensor, windshield, idle speed adjuster, foil sensor etc....
19. Calibration of sensors e.g. exhaust flap, interference tube flap, reversing aid setting, drive value sensor, gearbox, idling actuator, lambda sensors etc....
20. Actuator diagnostics e.g. fan, injection nozzle, valves
21. Tyre pressure sensor RDC teach-in - programming - initialisation
22. No limitation or restriction to models

Special functions: *

1. Service reset date/way
2. Date and time setting e.g. after battery change
3. Reset of the adaptation values for the engine control unit
4. Specific ACTUAL values
5. Reading the current KM
6. Read out chassis number
7. Valve clearance service reset
8. Bleed ABS pressure modulator
9. Calibrate idle speed adjuster
10. Brake wear indicator Initialise
11. Windshield calibration
12. ESA/SAF calibration
13. Stepper calibration
14. Calibration: Height sensor, windshield, idle speed adjuster, foil sensor etc....
15. Calibration of sensors: Exhaust flap, interference tube flap, reversing aid adjustment, drive value sensor, gearbox, idle speed actuator, lambda sensors.  
16. Actuator diagnostics
17. No limitation or restriction to models